FeaturedSolved
Aluminum 6061 vs 7075 for a CNC-milled drone arm — is the price difference worth it?
Ask the CommunityJames OkaforEngineer
31,33418
Discussions
Questions, ideas and projects from the Shapelid community.
18 results
Featured
From zero to €6k/month with two printers — what actually sold and what didn't
Ask the CommunityJames OkaforEngineer
34,87996
7820
Unanswered
Choosing between CNC turning and 3D printing for a threaded brass insert holder
Ask the CommunityAyşe YılmazDesigner
02213
What's the next big thing in professional 3D printing — tool changers, faster nylon, or something else?
Ask the CommunityLukas NovakCommunity Expert
22,66554
FeaturedSolved
First layer keeps peeling at the corners on PLA — is it bed adhesion or warping?
Ask the CommunityHannah LeeClient
32,14541
Anodizing color consistency across two batches — what to specify?
Ask the CommunityJames OkaforEngineer
13195
Solved
FDM vs SLS vs MJF for 50 functional nylon parts — real cost and quality difference?
Ask the CommunityAyşe YılmazDesigner
11,89537
Solved
Thread specs on CNC quotes — should I model threads or just note them in the drawing?
Ask the CommunityHannah LeeClient
14356
Minimum wall thickness for FDM PETG enclosures that need to survive drops
Ask the CommunityHannah LeeClient
298814
Showcase: 200-part SLS PA12 run for a drone gimbal — lessons on nesting and dyeing
Showcase and ProjectsSelin DemirEngineer
22,21462
Solved
Surface finish Ra 0.8 on stainless 316 turning — insert geometry or feeds?
Ask the CommunityCan ÖztürkEngineer
21,23524
Solved
How do you price short-run CNC turning jobs — setup time vs per-part cost?
Ask the CommunityCan ÖztürkEngineer
276611
Solved
Wet filament symptoms vs. wrong temperature — how do you tell them apart?
Ask the CommunityMarcus WeberDesigner
21,76733
Featured
Machinists of the community: what was your most expensive scrap and what did you learn?
Ask the CommunityJames OkaforEngineer
33,98788