FeaturedSolved
Aluminum 6061 vs 7075 for a CNC-milled drone arm — is the price difference worth it?
Ask the CommunityJames OkaforEngineer
31,33318
Ask the Community
Ask anything about 3D printing, CNC machining, materials and design for manufacturing.
Featured
From zero to €6k/month with two printers — what actually sold and what didn't
Ask the CommunityJames OkaforEngineer
34,87996
7810
Unanswered
Choosing between CNC turning and 3D printing for a threaded brass insert holder
Ask the CommunityAyşe YılmazDesigner
02193
What's the next big thing in professional 3D printing — tool changers, faster nylon, or something else?
Ask the CommunityLukas NovakCommunity Expert
22,66254
FeaturedSolved
First layer keeps peeling at the corners on PLA — is it bed adhesion or warping?
Ask the CommunityHannah LeeClient
32,14341
Anodizing color consistency across two batches — what to specify?
Ask the CommunityJames OkaforEngineer
13155
Solved
FDM vs SLS vs MJF for 50 functional nylon parts — real cost and quality difference?
Ask the CommunityAyşe YılmazDesigner
11,89337
Solved
Thread specs on CNC quotes — should I model threads or just note them in the drawing?
Ask the CommunityHannah LeeClient
14346
Minimum wall thickness for FDM PETG enclosures that need to survive drops
Ask the CommunityHannah LeeClient
298714
Solved
Surface finish Ra 0.8 on stainless 316 turning — insert geometry or feeds?
Ask the CommunityCan ÖztürkEngineer
21,23424
Solved
How do you price short-run CNC turning jobs — setup time vs per-part cost?
Ask the CommunityCan ÖztürkEngineer
276511
Solved
Wet filament symptoms vs. wrong temperature — how do you tell them apart?
Ask the CommunityMarcus WeberDesigner
21,76733
Featured
Machinists of the community: what was your most expensive scrap and what did you learn?
Ask the CommunityJames OkaforEngineer
33,98588
FeaturedSolved
What tolerances can I realistically expect from SLS nylon (PA12)?
Ask the CommunityMarcus WeberDesigner
31,85023